# New videos posted

**URL:** <https://forum.cadmunity.com/t/new-videos-posted/3209>\
**Category:** Solid Edge\
**Created:** [August 22, 2024, 3:55pm UTC](https://forum.cadmunity.com/t/new-videos-posted/3209 "2024-08-22T15:55:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![matt](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/matt/32/6_2.png) [@matt](https://forum.cadmunity.com/u/matt)\
**Post date:** [August 22, 2024, 3:55pm UTC](https://forum.cadmunity.com/t/new-videos-posted/3209/1 "2024-08-22T15:55:46Z")

</div>

I updated a set of videos for SW users making the switch to SE to include SE 2024 changes. Kind of an embarassing number of exclamation points in the text, but other than that, fun stuff.  
  
  
  
\<LINK\_TEXT text=“[https://www.youtube.com/playlist?list=P](https://www.youtube.com/playlist?list=P) … NzxLGcfciH”\>[https://www.youtube.com/playlist?list=PLtrztM3lxV3mAvOUfHmkYL\_NzxLGcfciH](https://www.youtube.com/playlist?list=PLtrztM3lxV3mAvOUfHmkYL_NzxLGcfciH)\</LINK\_TEXT\>

---

<div class="post-metadata">

**Author:** ![Imics13](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/imics13/32/5128_2.png) [@Imics13](https://forum.cadmunity.com/u/Imics13)\
**Post date:** [September 9, 2024, 2:04pm UTC](https://forum.cadmunity.com/t/new-videos-posted/3209/2 "2024-09-09T14:04:05Z")

</div>

Very good video series for Solidwors/SolidEdge users.

Thx for it!

All the best,  
Imi

---

<div class="post-metadata">

**Author:** ![matt](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/matt/32/6_2.png) [@matt](https://forum.cadmunity.com/u/matt)\
**Post date:** [September 9, 2024, 7:56pm UTC](https://forum.cadmunity.com/t/new-videos-posted/3209/3 "2024-09-09T19:56:37Z")

</div>

> [@](#):
>
> Very good video series for Solidwors/SolidEdge users.
> 
> Thx for it!
> 
> All the best,  
> Imi

Thanks, Imre! Hope you’re doing well. Haven’t heard from you in a while!