# HOLE WIZARD ERROR

**URL:** <https://forum.cadmunity.com/t/hole-wizard-error/1424>\
**Category:** SW General\
**Created:** [February 4, 2022, 3:59pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424 "2022-02-04T15:59:08Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dalego](https://forum.cadmunity.com/letter_avatar_proxy/v4/letter/d/8491ac/32.png) [@Dalego](https://forum.cadmunity.com/u/Dalego)\
**Post date:** [February 4, 2022, 3:59pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/1 "2022-02-04T15:59:08Z")

</div>

So I always find it odd that SW can show you the preview of what you want and yet still spit an error at you. In todays example I am doing a simple grease zerk hole. Preview shows what I want and I still get a error code? Am I doing something wrong or is SW just being a pain?  
 ![sw error.png](https://forum.cadmunity.com/uploads/default/original/2X/3/3b868bafecd9eb0edbe64f6ca03a532d192f79d5.png)

---

<div class="post-metadata">

**Author:** ![Glenn\_Schroeder](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/glenn_schroeder/32/7_2.png) [@Glenn\_Schroeder](https://forum.cadmunity.com/u/Glenn_Schroeder)\
**Post date:** [February 7, 2022, 1:20pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/2 "2022-02-07T13:20:17Z")

</div>

Can you show the previous page of the Hole Wizard property manager? Or at least check to make sure you have the correct body selected?

---

<div class="post-metadata">

**Author:** ![DanPihlaja](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/danpihlaja/32/5186_2.png) [@DanPihlaja](https://forum.cadmunity.com/u/DanPihlaja)\
**Post date:** [February 7, 2022, 4:04pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/3 "2022-02-07T16:04:07Z")

</div>

Also, you don’t necessarily need the tangent plane for the hole. You can place hole wizard holes on the sides of cylinders. Then constrain them like any 3D sketch.

---

<div class="post-metadata">

**Author:** ![SPerman](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/sperman/32/59_2.png) [@SPerman](https://forum.cadmunity.com/u/SPerman)\
**Post date:** [February 7, 2022, 4:21pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/4 "2022-02-07T16:21:58Z")

</div>

I get a similar error if the plane is below the face of the cylinder.

---

<div class="post-metadata">

**Author:** ![TK.421](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/tk.421/32/6325_2.png) [@TK.421](https://forum.cadmunity.com/u/TK.421)\
**Post date:** [September 17, 2026, 2:47pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/5 "2026-09-17T14:47:08Z")

</div>

Here its on the top of the cylinder. Anyone ever figure out why?

 ![image](https://forum.cadmunity.com/uploads/default/original/2X/e/e1958a31f729a1ed4d66fb7c6373c8dc39cc4c21.png)

---

<div class="post-metadata">

**Author:** ![TK.421](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/tk.421/32/6325_2.png) [@TK.421](https://forum.cadmunity.com/u/TK.421)\
**Post date:** [September 17, 2026, 3:04pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/6 "2026-09-17T15:04:57Z")

</div>

Nvm… I’m an idiot. I made 4 copies of this model to use in my assembly and when rotating the model I mustve been putting the feature on the wrong one…

---

<div class="post-metadata">

**Author:** ![len\_1962](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/len_1962/32/6448_2.png) [@len\_1962](https://forum.cadmunity.com/u/len_1962)\
**Post date:** [September 18, 2026, 4:52pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/7 "2026-09-18T16:52:20Z")

</div>

we all have those moments

---

<div class="post-metadata">

**Author:** ![TK.421](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/tk.421/32/6325_2.png) [@TK.421](https://forum.cadmunity.com/u/TK.421)\
**Post date:** [September 18, 2026, 5:32pm UTC](https://forum.cadmunity.com/t/hole-wizard-error/1424/8 "2026-09-18T17:32:46Z")

</div>

💯

,
