# Exposure Times for Resin Printing (MSLA)

**URL:** <https://forum.cadmunity.com/t/exposure-times-for-resin-printing-msla/841>\
**Category:** 3D Print\
**Created:** [July 10, 2021, 9:52pm UTC](https://forum.cadmunity.com/t/exposure-times-for-resin-printing-msla/841 "2021-07-10T21:52:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zxys001](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/zxys001/32/85_2.png) [@zxys001](https://forum.cadmunity.com/u/zxys001)\
**Post date:** [July 10, 2021, 9:52pm UTC](https://forum.cadmunity.com/t/exposure-times-for-resin-printing-msla/841/1 "2021-07-10T21:52:29Z")

</div>

Getting the best Exposure Times for Resin Printing (MSLA) by using Test Validation models.  
  
[https://www.youtube.com/watch?v=zSQtMmLVdRg](https://www.youtube.com/watch?v=zSQtMmLVdRg)

---

<div class="post-metadata">

**Author:** ![zxys001](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/zxys001/32/85_2.png) [@zxys001](https://forum.cadmunity.com/u/zxys001)\
**Post date:** [July 12, 2021, 2:43pm UTC](https://forum.cadmunity.com/t/exposure-times-for-resin-printing-msla/841/2 "2021-07-12T14:43:55Z")

</div>

[https://www.youtube.com/watch?v=GL-9Ia0SibQ&amp;t=96s](https://www.youtube.com/watch?v=GL-9Ia0SibQ&amp;t=96s)

---

<div class="post-metadata">

**Author:** ![zxys001](https://forum.cadmunity.com/user_avatar/forum.cadmunity.com/zxys001/32/85_2.png) [@zxys001](https://forum.cadmunity.com/u/zxys001)\
**Post date:** [July 12, 2021, 3:17pm UTC](https://forum.cadmunity.com/t/exposure-times-for-resin-printing-msla/841/3 "2021-07-12T15:17:18Z")

</div>

[https://www.youtube.com/watch?v=r9GwPEJ8Lq8](https://www.youtube.com/watch?v=r9GwPEJ8Lq8)